Limit Switch lineup > Cored motor
|
Product Overview
Simple Control via Limit Switch
Low failure thanks to simple wiring and intuitive installation.
Compactly integrated into small case (Limit switch, DC motor, gearbox, lead screw, rod, etc.)
Relatively reasonable cost comparing to servo actuator lineup
Long lifespan due to simple structure and current limitation
12mm diameter cored motor lineup
– The coreless motor is superior to the cored motor in terms of force and durability.
22mm stroke
Rated Load of 12N
7.4V or 12V motor voltage option
Travel can be adjusted within 22mm when external switch is applied.
Lineup
* Shipment from Korea
* If you wish to get product from USA, please click here.
Stroke | Motor Voltage | Rated Load / Speed | Model | |||
---|---|---|---|---|---|---|
22mm | 7.4V | 12N / 12mm/s |
|
|||
12V | 12N / 12mm/s |
|
- Heavy duty cored motor applied
- 26mm stroke (27mm stroke can be extended to 29mm using IR-USB01)
- Force option – 6N and 12N
- 7.4V or 12V input voltage option
- RS-485 or TTL/PWM protocol option
- Engineering plastic rod
Main Features
- 500μm Unidirectional repeatability & Position feedback
- Cored motor
- Smart Overload protection detects jam or over 50% duty-rate (Overridable)
- Compact size for space constraints
- Various mounting solutions
- Detachable and 90° rotatable hinge design (Patented)
- Motor voltage options (7.4V, 12V)
Applications
- Medical device and Lab equipment
- Vending and game machines
- Robotics
- Automation (Factory / Home / Agriculture etc)
- Production and inspection jigs
- UAV (Fixed wing / Helicopter / Multicopter etc)
- DYI, Education, Hobby, etc
Specification
Cored motor lineup
* Shipment from Korea
* If you wish to get product from USA, please click here.
Common Specification
Stroke | 22mm | |||
---|---|---|---|---|
Positional Accuracy | 500μm (0.5mm) | |||
Mechanical Backlash | 0.03mm (30μm) | |||
Rod Type | Engineering Plastic Rod | |||
Motor Type | Cored Motor | |||
Watt | 26W | |||
Recommend Duty Cycle | At rated Load | At applicable Max Load | ||
Max 50% | Max 20% | |||
Input Voltage Range | 7.4V | 12V | ||
5~8.9V | 7 ~ 13V | |||
Current Consumption | Motor Voltage | Idle | Rated(No Load) | Stall |
7.4V | 50mA | 120mA | 360mA | |
12V | 50mA | 100mA | 250mA | |
Audible Noise | Approx. 50db at 1m | |||
Ingress Protection | IP-54 (Dust & Water Tight) | |||
Size / Weight (Excluding rod-end & hinge) |
57.4(L)x29.9(W)x15(H)mm / 48g | |||
Operating Temperature | -10℃ ~ 60℃ | |||
Wire | AWG 22 |
* Design and Specification can be changed without prior notice for further improvement.
Dimension
22mm Stroke Version
Standard Accessories
![]() |
Hinge : Hinge is rotatable by 90 degree according to the mounting condition. |
Without hinge, actuator can be mounted using IR-MB02 (for 26, 27mm stroke version) or IR-MB03(for 41/56/96mm stroke version) Metal brackets. Also, IR-EB01 Rod end bearing is also one of mounting option. Please refer to the mounting manual for each accessory. |
|
![]() |
Rod-end tip and ![]() |
Or, user may apply their own rod-end tip(M3 standard). Make sure to put ![]() The M3 nut is a double nut concept for angle adjustment of rod-end tip mounting. When mounting rod-end tip, make sure to fix the M3 nut and the rod-end tip by the tool(such as long nose) to set angle and to prevent the rod from turning together. (If not, it may cause damage to the product. The rod should not be turned all the time.) |