Accessories : Mounting Solution
|
- Metal Barcket (IR-MB02)
- Metal Barcket (IR-MB03)
- Metal Barcket (IR-MB04)
- End Bearing (IR-EB01)
- U Type Metal Bracket (IR-MB05)
Metal Bracket
IR-MB02
(for 26mm, 27mm stroke version Lateral mounting)
COMPONENTS
Use IR-MB02 metal bracket to mount the servo onto applications tightly. Referring to published drawings, user is also able to make this bracket at their end if necessary. This is for 26mm, 27mm stroke version as 40mm ~ 96mm stroke versions have built-in mounting holes on it.
.
Installation manual can be downloaded from our web(click).
.
Drawings can be downloaded from our web(click).
HOW TO MOUNT
CAUTIONS
Make sure to use Spring Washer included in the bracket package when fix M2.5 L5(P-HEAD) screw mark in the circle. Otherwise, it may cause serious product damage.
Metal Bracket
IR-MB03
(for 40 ~ 96mm stroke version only)
COMPONENTS
Individual bracket A(IR-MB03-A), B(IR-MB03-B), C(IR-MB03-C) can be respectively purchased if necessory. 

* Shipment from Korea
* If you wish to get product from USA, please click here.
HOW TO MOUNT
- Using End bearing(IR-EB01)
- Using Tap holes on servo motor case without brackets
- Metal Barcket(IR-MB03 which is dedicated for 40 ~ 96mm Stroke Version)
.
Installation manual can be downloaded from our web(click).
.
Drawings can be downloaded from our web(click).
Metal Bracket
IR-MB04
(for 26mm, 27mm stroke version Vertical mounting)
End Bearing
IR-EB01
Mount mightyZAP on applications using this end-bearing for most optimal installation. Put it on the Rod-end(M3) and on the end of servo case (M2.5). Two end bearings (M3 and M2.5) to be packed in a set..
U Type Metal Bracket
IR-MB05
COMPONENTS
The IR-MB05 U type bracket can be mounted on the Rod-end of actuator and can be used with the rear-hinge included in the actuator.
User is able to adjust the angle of the U type bracket freely using Tooth Lock washer.
User is able to adjust the angle of the U type bracket freely using Tooth Lock washer.
HOW TO MOUNT
- After inserting ① Tooth Lock Washer between U bracket and actuator rod,
- Fix the ②U-type Bracket with ③M3 Socket Head Bolt at the desired angle.
- Insert ④ the hinge-pin together with the object and fix it with ⑤ 2 x E-rings.