Accessories : Board

EZ Controller (IR-CT01)

  • mightyZAP controller/tester for customers who do not have their own controller
  • Arduino based simple operation
  • Built-in basic control program, User programmable (Arduino example provided)
  • Built-in position setting dials, position command button switches and position command slide
  • Controllable through external switch or voltage level signal
  • 6 x I/O pins for analog/digital sensor connection
  • External communication terminal for Bluetooth or Zigbee communication

* Shipment from Korea
* If you wish to get product from USA, please click here.

PC USB Interface
IR-USB01

IR-USB01 is an interface board to control parameters in user’s PC. Dedicated software to be provided.
After connecting the PC and the actuator through IR-USB01 (PC USB Interface), you can set various parameters, perform simple operation tests, and update firmware through the dedicated mightyZAP Manager software.

[ FORCE Control Lineup ]

  • Setting various operation parameters & memory parameters
  •  – Baud rate, ID, Delay, Stroke limit, Compliance margin setting
  •  – Goal Speed, Goal Position, Goal Current, LED Alarm, Shutdown setting
  •  – Acceleration / Deceleration Setting
  • Simple Motion Test
  • System reset and Firmware update
  • Motor Operating Rate, Voltage, Temperature, Position, Current real time monitoring
  • Need optional PC USB Interface “IR-USB01” (Sold separately)
  • Windows compatible mightyZAP manager PC software enables users to set various parameters & test motions. (Able to downloaded from our website for free)
  • (PC Software will be updated from time to time, so it is recommended for the user to download and update PC software properly.)

[ Position Control Lineup ]

  • Setting various operation parameters & memory parameters
  •  – Baud rate, ID, Delay, Stroke limit
  •  – Motor Operating rate, Goal Position
  •  – LED Alarm, Overload setting
  • Simple Motion Test
  • System reset and Firmware update
  • Motor Operating rate, Voltage, Temperature, Present position monitoring
  • Need optional PC USB Interface “IR-USB01” (Sold separately)
  • Windows compatible mightyZAP manager PC software enables users to set various parameters & test motions. (Able to downloaded from our website for free)
  • (PC Software will be updated from time to time, so it is recommended for the user to download and update PC software properly.)

* Shipment from Korea
* If you wish to get product from USA, please click here.

Arduino Servo Tester Shield (IR-STS01) for mightyZAP

Control servo motions without PC software. Built with Arduino Leonardo and our own servo shield, user controls servo motor using Arduino API & libraries.

[Attention!]
Please do not supply power to IR-STS01 when it is placed on the un-insulated material such as a metal plate.
It causes serious damage on the product due to the short-circuit.

* Shipment from Korea
* If you wish to get product from USA, please click here.

Raspberry Pi HAT(IR-STS02) for mightyZAP

IR-STS02 is a Raspberry Pi add-On board which is compatible with Raspberry Pi B3 or Raspberry Pi Zero.
With TTL/RS-485/PWM communication interface, power connector and GPIO pins, user is able to control mightyZAP on Raspberry Pie.
API and Library can be downloaded from our web(click).

* Shipment from Korea
* If you wish to get product from USA, please click here.